English     العربیه

 

 

 

Academic Position:

  Professor

Education:

 

(1984-88)

Ph.D., Applied Mechanics, U.M.I.S.T., Manchester, U.K.

Thesis Tiltle: "Investigation into the Rolling of Thick and Thin Walled Profiled Rings" 

Thesis Advisor: Prof. J.B. Hawkyard


(1982-84)

M.Sc., Applied Mechanics, U.M.I.S.T., Manchester, U.K.

M.Sc. program by Course & Research.

 The title of Dissertation "Design of a Semi Continuous Draw-Bench."


(1973-78)

B.Sc., . Mechanical Engineering, Sharif University of Technology, Tehran, Iran

Expertise :

 

· Mechanical Enginneering Design, Mechanics of solid deformable bodies, Theory of Plasticity.

· Metal Forming: Rolling of section and sheet,  Ring rolling, Extrusion, Forging, Sheet metal forming.

· Fracture and damage.

 

Employment History:

Professor, Mech. Eng. Dept., Isfahan University of Technology (IUT), Isfahan, Iran.

2008-2010

Professor & Chair, Mech. Eng. Dept., IUT, Isfahan, Iran.

2001-2008

Associate professor, Mech. Eng. Dept., IUT, Isfahan, Iran.

2000-2001

Visiting Professor University of British Columbia, Canada.

1999-2000

Academic staff, Mech. Eng. Dept., IUT, Isfahan, Iran.

1993-1999

Graduate Program Advisor, Mech. Eng. Dept., IUT, Isfahan, Iran.

1992-1993

Assistant professor &Deputy of educational affair, Mech. Eng. Dept., IUT, Isfahan, Iran.

1988-1992

 

Awards & Honours:

Outstanding Professor of the year 2009 in Iran. Accredited by the Iranian Society of Mechanical Engineers.  

 

 

· Distinguished Researcher of the year 2008 at Isfahan University of Technology.

· Distinguished Researcher of the year 2007 at Isfahan University of Technology.

· Distinguished Researcher of the year 2004 in Isfahan province.

· Distinguished Researcher of the year 2003 in Isfahan Province.

· Exceptional Researcher of the year 2004 at Isfahan University of Technology.

· Distinguished Researcher of the year 2003 In Isfahan University of Technology.

· The Bootaan a Award appreciated by the Iranian Society of Mechanical Engineers ( Non Governmental Organization) by virtue of supervision of the most excellent PhD thesis of the year 2002.

· The Ali-Nasab Award by the Iranian Society of Mechanical Engineers ( Non Governmental Organization) by virtue of supervision of the most excellent M.Sc. thesis of the year 2002

 

Member in Editorial Board:

Editorial Board, Sharif Journal of Science and Engineering, Transaction on Mechanical Engineering.

· Editorial Board, Ferdousi Journal Applied Science and Computation.

· Editorial board, Journal of solid Mechanics in Engineering.

 

Organizing Committee of CONGRESSES :

Chairman of the 13th International conference on Mechanical Engineering, Iranian Society of Mechanical Engineers ISME2006, Isfahan, Iran.

· Chairman of the 14th International conference on Mechanical Engineering, Iranian Society of Mechanical Engineers ISME2006, Isfahan, Iran.

 

COURSES LECTURED

Undergraduate Courses:

1-Static

2- Dynamics

3- Engineering Mathematics

4-Strength of Materials I and II

5-Engineering Plasticity

6- Manufacturing Technology                          

7-Engineering Instrumentation and Control

8-Die Design for Sheet Metal Fabrication

                

Graduate Courses:

1-Applied Plasticity (for Manufacturing Program)

2-Advanced and Computational Theory of Plasticity

3-Metal Forming

4-Theory of Plate and Shells

5-Theory of Elasticity

6-Sheet Metal Fabrication

7-Pressure vessel piping and design

                

Others:

Short-term courses in" Manufacturing and Metal Working Technology" mostly   for industry

 

Industrial Research Works

Isfahan University of Technology:

· Design and manufacture of an experimental ring rolling mill.

· Investigations into the collapse of simple and reinforced thin walled channel beams under bending  load.

· A better estimation of rolling load and torque in rolling process.

 

Iran National Steel Companies:

· Investigations into the method of reducing various defects on cold rolled uncoated sheet.

· Width control in hot strip rolling.

· Improving production efficiency and dimensional control in rolling of sections/beams.

· Modifications into the coiling mechanism of product in skin-pass rolling.

· Presenting of a general research plan for steel companies in Iran (based on the trend of technology in  steel production industries)

· Study on lubrication effects in cold rolling of steel strip

· Investigations on tension leveling systems and Optimization of current rigs in cold rolling mills in  Mobarekeh steel Complex.

· On the cutting technique of HSS steel by wire-cut machines.

· Investigations on skin pass rolling for elimination /Marked reduction of vibration effects on this unit product at Mobarekeh steel complex.

· Technical Investigations of the Tension Reel in the Pickling Line  at Mobarakeh Steel Complex for  Domestic Manufacturing of the  Assembly.

· Determination of Physical and Operational Specifications of a Tin Plate Pilot for Mobarakeh Steel  Complex

· Recognition of shape defects including wave and thickness profile and rocedures for prohibiting of such defects and presenting methods for marked reduction of such defects in clod rolled products of  Mobarakeh Steel Company.  

 

International Systems Engineering and Automation Company:

· Development of mathematical models for predicting crown and flatness in a four high plate mill  (Mobarakeh steel Complex)

 

Publications

International Journal Papers

 

· S. Asghari, M. Salimi, “Finite element simulation of thermal barrier coating performance under thermal cyclingSurface and Coatings Technology, Article in Press, avaialble online, 2010.

 

· M.R. Vaziri, M. Salimi, M. Mashayekhi “Evaluation of chip formation simulation models for material separation in the presence of damage models”Simulation Modelling Practice and Theory, accepted for publication, 2010.

 

· S. Asghari, M. Salimi, M. Salehi “Modeling nonlinear elastic behavior of plasma sprayed ceramics and its evolution with sintering” Materials Science and Engineering A, 527 (16-17), pp. 4241-4249, 2010

 

· Valizadeh, M., Lomov, S., Ravandi, S.A.H., Salimi, M., Rad, S.Z.”Finite element simulation of a yarn pullout test for plain woven fabrics” Textile Research Journal, 80 (10), pp. 892-903, 2010.

 

· A.H. Sakhaei, M. Salimi, M. Kadkhodaei “Caliber Design in Shape Rolling by Finite Element Method” steel research int. 81 No. 9, 2010.

 

· A. Nourani, M. Salimi, A. Sadeghi Dolatabadi “Work roll wear modeling in hot plate rolling by neural network” International Journal of Engineering, Science and Technology, 2010, Vol. 2, No. 6, pp. 85-97, 2010.

 

· M. Valizadeh, S.A.H. Ravandi, M. Salimi, “Experimental evaluation of oscillation model for yarn pullout test of plain-woven fabrics based on force-balance method” Journal of the Textile Institute, 101 (4), pp. 343-349, 2010.

 

· M. Salimi, M. M. Sahebifard “Optimization of Strip Profile and Flatness Using Hybrid Neural-GA Algorithm” steel research int. 81, No. 9, 2010.

 

· M.R. Vaziri, M. Salimi, M. Mashayekhi “A new calibration method for ductile fracture models as chip separation criteria in machining” Simulation Modeling Practice and Theory 18, pp. 1286-1296, 2010.

 

· M. R. Niroomand, M. R. Forouzan, M. Fasihfar, M. Salimi “Chattering Control Based Algorithm for Nonlinear Optimization of 5-Stands Cold Strip Rolling Process Parameters” steel research int. 81, No. 9, 2010.

 

· M. Qwamizadeh, M. Kadkhodaei, M. Salimi “Analysis of Curvature Development in Asymmetrical Plate Rolling in Free and Forced Horizontal Entry Conditions” steel research int. 81, No. 9, 2010.

 

· M. Vaziri, M. Salimi” Comparison of finite element method based on nodal displacement

· and absolute 3 nodal coordinate formulation (ANCF) in thin shell analysis”  Communications in Numerical methods in Engineering, Published Online: 12 Nov 2009 Copyright © 2010 John Wiley & Sons, Ltd

 

· M. Jamshidian, A. Beheshti, M. Olfatnia, A. Sadeghi and M. Salimi “Analysis of Strip Residual Curvature in Anti-Crossbow Cassette During Tension Leveling”. Steel Research International, Vol. 79,  2008.

 

· Ziaei-Rad S., Salimi M., Mirfendereski L., “Finite element  modeling of foam-filled tapered thin-walled tubes under oblique impact loading” Steel Research International, Vol. 79,  2008.

 

· R. Mehrabi, M. Salimi, S. Ziaei-Rad, A. Kamranian, M. Silani, “Influences of operational parameters on chatter vibration of cold rolling machines using finite element method” Steel Research International, Vol. 79,  2008.

 

· M.R. Forouzan, I. Kiyani, M. Salimi, A.R. Ghasemi “Analysis of chatter vibration in cold strip rolling, part I: System equivalent damping” Steel Research International, Vol. 79,  2008.

 

· M. Olfatnia, M. Salimi, S. Ziaei-rad, A. Kamranian" Investigation into sources of chatter and vibrations in cold rolling mills" Steel Research International, Vol. 79,  2008.

 

· M. Salimi, M. Esfahanian, M. Arabof, “ A mixed film lubrication model in rolling of foils” Steel Research International, Vol. 79, 2008.

 

· L. Mirfendereski, M. Salimi, S. Ziaei-Rad “Parametric Study and Numerical Analysis of Empty and Foam-filled Thin Walled Tubes under Static and Dynamic Loadings” Int. J. Mech. Sci. 50, 1042-1057, 2008.

 

· M. Valizadeh, S.A.H. Ravandi, M. Salimi and M. Sheikhzadeh “Determination of Internal Mechanical Characteristics of Woven Fabrics using the Force- Balance Analysis of Yarn Pullout Test” TJTI, Vol. 99 No.1 pp. 47-55, 2008.

 

· M. Kadkhodaei, M. Salimi, RKND. Rajapakse and M. Mahzoon “ Microplane modeling of shape memory alloy” Physica Scriptia T129, pp.  329-334, 2007.

 

· M. Kadkhodaei, M. Salimi, RKND. Rajapakse and M. Mahzoon, “Modeling of Shape Memory Alloys Based on Microplane Theory” J. Intell. Mater. Syst. Struct. 19 (5), pp. 541-550, 2008

 

· M. Kadkhodaei, M. Salimi, M. Poursina “ Analysis of Asymmetrical Sheet Rolling by Genetic Algorithm” Int. J. Mechanical Sciences 49, pp. 622-634, 2007.

 

· F. Farhat-Nia, M. Salimi and M.R. Movahhedy “Elasto-plastic finite element simulation of  asymmetrical plate rolling using an ALE approach” Journal of Material Processing Technology, 2006.

 

· M. Sombolestan, M. Salimi "Power Optimization of Common Breaking-Down Sequences in Shape Rolling" Journal of Material Processing  Technology, 177 (1-3), pp. 517-520, 2006.

 

· M. Saniei, M. Salimi “Development of a mixed film lubrication model in cold rolling” Journal of Material Processing Technology, 177 (1-3), pp. 575-581, 2006.

 

· M. Salimi, M. Kadkhodaei “Slab analysis of asymmetrical sheet rolling” Journal of Materials Processing Technology,150 (3) pp.215-222, 2004.

 

· M. Salimi, M. Kabirian “An upper bond stream function elemental technique for the forging of spur gears” Steel Grips, Journal of steel and related Materials, 2, pp.159-163, 2004.

 

· M. Salimi , M. Kadkhodaei “Asymmetrical cold sheet rolling in free horizontal entry conditions” Steel Grips Journal of steel and related Materials, 2, pp.75-80, 2004.

 

· M.R. Forouzan, M. Salimi , M.S. Gadala, A.A. Aljawi “Guide rolls simulation in FE   analysis   of ring rolling” Journal of Material processing Technology, 142, pp. 213-223, 2003.    

 

· M.R. Forouzan, M. Salimi ,M.S. Gadala, “Three _ dimensional FE analysis pf ring rolling by employing thermal spokes method” International Journal of Mechanical Sciences 45, pp. 1975-

· 1998, 2003.

 

· M. Salimi and F. Sassani “Modified slab Method for Predicting Parameters and Curvature in Asymmetrical Rolling of Strip International Journal of Mechanical Sciences, Vol. 44, pp.1999-   

· 2023, 2002

 

· M. Salimi, ”Strain Distribution in Plane Strain Deformation through Wedge-shaped Dies” Journal of Material processing Technology 125-126 pp. 317-322, 2002.

 

· M. Salimi and M.R. Forouzan,” Determination of Bending Actuators Set-points to Control Crown and Flatness in Hot Rolling of Strip” Journal of Material processing Technology 125-126,  pp. 670-677, 2002.

 

· M. Salimi and J.B. Hawkyard," Forming of Thin Walled Profiled Rings by Ring Rolling," Int. J. Mech. Sci., Vol.30, No.7, pp. 527 – 532, 1988.

 

Persian(Farsi) Journal Papers

 

· R. Mehrabi, S Ziaei-rad , M. Salimi” Simulation of Chatter in Cold Rolling Strip using Finite Element Method” Journal of Amir Kabir, 2010

 

· M. Salimi, M. Jamshidian, A. Beheshti “Bending Unbending Analysis of Anisotropic sheet under plane Strain Condition” Journal of Esteghlal, Vol. 28, 2008.

 

· F. Farhat-Nia, M. Salimi "Application of Modified slab method in  asymmetrical plate rolling" Accepted for publication in the Journal of Esteghlal, 2006

 

· A. Fazileh, M. Salimi “ The effect of friction in rolling of section by the FE method” Seasonal Scientific specialist in Solid Mechanics, No 1,  2009

 

· M. Araboff, M. Salimi, M. Esfahanian “On the lubrication effect in rolling of foils” Seasonal Scientific specialist in Solid Mechanics, No 3, 2009

 

· F. Farhat-Nia,  M. Salimi "Rolling Analysis of Clad sheet by the modified slab method." Journal of Esteghlal, Vol.25, 2005

 

· M. Salimi, S. Asghari "Investigations on cold rolling of strip in attendance of Hydrodynamic lubrication." Journal of Esteghlal, Vol.24, No.1 2nd Volume, 2005.

 

· M.R. Forouzan, M. Salimi and M.S. Gadala” Ring Rolling FE analysis in the presence of the guide rolls”, Journal of Esteghlal, Vol.21, No.2, 2003.

 

· M. Salimi , S. Mohammadi," Metal Flow Analysis in Hot Rolling of Plate and Strip Using Matrix Operator Method for Constructing Plastic Slip Line Field, "Journal of Amir Kabir, Vol.10

 

· M. Salimi, S.R. Yassini, "Frictional Effect on Spread and Bulge in Flat Rolling," Journal of Amir Kabir, Vol.9, No.36, 1998.

 

· M. Salimi,  H.R. Malek," Investigations into the Effect of Interstand Tensions on Width Control in a Hot Rolling Process," Journal of Esteghlal, Vol.15, No.2, pp.95 - 105, 1997.

 

· M. Salimi, H. khademizadeh," Experimental Investigations into the Collapse of Simple and Reinforced Thin-Walled Channel Beams Under Bending Loads," Journal of Esteghlal, Vol.17, No.1, pp.153-164,1998

 

Conference Papers

 

· A.H. Sakhaei, M. Salimi, M. Kadkhodaei, “Investigations into the roll pass Design of Channel Section Beams in Conventional Rolling”  18th Annual (international) Conference of Mechanical Engineering ISME2010, Tehran, Iran

 

· M. M. Sahebifard, M. Salimi, A. Sadeghi, H. Alaei, “Control of thickness profile and shape defects in cold rolling by neural network and genetic algorithm” 18th Annual (international) Conference of Mechanical Engineering ISME2010, Tehran, Iran

 

· A. Nourani M. Salimi, A. Sadeghi Dolatabadi “ A work roll wear profile model in hot rolling of strip”

· 18th Annual (international) Conference of Mechanical Engineering ISME2010, Tehran, Iran

 

· E. Mohammadi, M. R. Forouzan, M. R. Niroomand, M. Salimi “Optimization of multi stand cold strip rolling process parameters according to chatter phenomenon by TAANGA method” European Congress on Computational Mechanics, ECCM 2010, Paris, France.

 

· I. Mohagheghian, M. Kadkhodaei, M. Salimi “A Fully Coupled Electro-Thermo-Mechanical Model for SMA Wires” AES – ATEMA’ 2009 Montreal, Canada: July 06 -10, 2009

 

· S. Jafari, M. Kadkhodaei, M. Salimi “Microplane Modeling of Shape Memory Alloy Torque Tubes” AES – ATEMA’ 2009 Montreal, Canada: July 06 -10, 2009

 

· M. Salimi, S. Ziaei-Rad, and A. M. Ebrahimpour “Quasicontinuum (QC) simulation of aluminum film  nanoindentation” National Conference on New Materials, 10-13 June 2008, Iran

 

· H. Alaei, M. Salimi, A. saboonchi, S. Kheradamand, M. Sahebifard  “Development of a neural network for thermal crown evaluation in hot rolling” ISME2008, Kerman, Iran.

 

· I. Mohagheghian, M. Salimi  M. Kadkhodaei, “Thermal response of SMA wires under electrical actuation” ISME2008, Kerman, Iran.

 

· M. Salimi, S. Ziaei-Rad, and A. M. Ebrahimpour “Evaluation of mechanical properties in nano-indentation by a cylinderical indentors using a Quasicontinuum method” ISME2008, Kerman, Iran

 

· I. Kiani, M. Olfat Nia, M. Salimi, S. Ziaei-Rad and A. Kamranian “Determination of cold rolling parameters for prohibiting of chatter in tandem mills” ISME2008, Kerman, Iran.

 

· M. Tarkesh  M. Salimi. and RT. Tarkesh “Gear Rolling on deep drown vessels wall”. ISME2008, Kerman, Iran

 

· M. Olfat-Nia, A. Kamranian, A. Sadeghi, M. Jamshidian, S. Ziaei-Rad  and M. Salimi “Further Investigation on Chatter Analysis in Cold Rolling Mills for Finding the Optimum Range of Design Parameters” Conf. on Applications and design in Meechanical Engineering, 25-27 Oct. 2007, Kangar, Perlis Malaysia

 

· M. Arabof, M. Salimi and M. Esfahanian “Investigations on rolling of foils considering the lubricant effects”. ISME2008, Kerman, Iran

 

· M. Salimi& M. Kabirian “An upper bond stream function elemental technique for the forging of spur gears”,  ISME2007, Tehran, Iran

 

· M. Olfatnia, M. Salimi, and S. ZiaeeRad “Further investigations on chatter analysis in cold rolling mills for finding optimum range of design parameters” Conference on applications and design in Mechanical Engineering, Malaysia, 2007

 

· M. Salimi, “Improving Surface quality and mechanical properties of cold rolled product for Structural Auto Body.” The keynote speech of the 1st Conferance of Metal Forming of the Iranian Society of Mechanical Engineers, 2006, Tehran, Iran.

 

· M. Valizadeh, S. Hoseini, M. Salimi and M. ShyeKhzadeh “Investigations on yarn pull-out test using an image processing method” 3rd international Textile, Clothing and Design Conf. Croatia, 2006

 

· M Kadkhodaei, M Calimi, RKND Rajapakse and M Mahzoon " Microplane modeling of shape memory alloys" 2nd International Symposium on Func4ional Materials (ISFM-2007)2007, Hangzhou, China

 

· M. Valizadeh, S.A. Hossaini, M. Salimi and M. Shakhzadeh “On the  Hanging Fiber Method in studying the effect of normal load on friction coefficient of the Yarn” 14th Annual (international) Conference of Mechanical Engineering ISME2006, May 16-18, 2006

 

· M.R. Forouzan, I. Salehi, M. Salimi, M. Esfahanian, "Elasto-Viscoplastic FE Analysis of  Slab Width Reduction by Sizing Press Mill" The 14th annual (international) conference on Mechanical Engineering ISME2006, Isfahan, Iran

 

· M. Valizadeh, S.A. Hossaini, M. Salimi and M. Shakhzadeh "The Empirical Investigations of an Analytical Model Predicting Yarn - Pullout Force of Woven Fabrics" The 8th Asian Textile Conference, Tehran, 2005

 

· I. Salehi, M.R. Forouzan, M. Esfahanian, M. Salimi, M. H. Adibi  “Elasto-Viscoplastic FE Analysis of Slab Width Reduction by Sizing Press Mill” Asia Steel International Conference 2006, Japan.

 

· F. Farhat-Nia, M. Salimi “An Analytical approach to clad sheet rolling by the modified slab method” GALVATECH”07 The Iron and Steel Institute of Japan, Osaka, Japan

 

· M Salimi, N. Ghazi” The Effect of interstand tension on the rolling parameters by Neural-network” The 14th Annual (international) Conference of Mechanical Engineering ISME2006, May 16-18, 2006

 

· M. Salimi, L. Tahvilian “Investigations on the Effect of Rolling Parameters on Strip Mechanical Properties by Neural-network” The 14th Annual (international) Conference of Mechanical Engineering,  ISME2006, May 16-18, 2006

 

· R. Saleh, M. Salimi “On the calculation of the roll Separating force in Cold Rolling- An industrial Approach” The 13th Annual (international) Conference of Mechanical Engineering, ISME2006, 17-19

· May 2005

 

· M. Salimi, Mostafa Jamshidian, Ali Beheshti ”Bending Unbending Analysis of Anisotropic sheet under plane Strain Condition” The 14th Annual (international) Conference of Mechanical Engineering ISME

· 2006 May 16-18, 2006

 

· M. Saniei and M. Salimi “The effect of Backward and Forward Tension on Cold rolling Parameters” Steel Rolling 2006 Cedex, France.

 

· M. Jelokhanian & M. Salimi "On the thread rolling of the screws "The 13th Annual (international) Conference of Mechanical Engineering, ISME2005, Isfahan, Iran.

 

· M. Salimi & M. Soheili "On the evaluation of the fillet weld sizes of T Joints structures." The 14th Annual (international) Conference of Mechanical Engineering, ISME2006

 

· M. Salimi, M. Esfahanian, N. Rasekh Saleh J. Izadi, B. Bahadorani & S. Abbasi "On the Calculation of the Roll Separation force in cold rolling." The 13th Annual (international) Conference of Mechanical

· Engineering, ISME2005, Isfahan, Iran.

 

· S.M. Sombolestan and M. Salimi “Power Optimization of Common Breaking Down Sequences” ICTP 2005 Oct.9-13 Verona, Italy

 

· M. R. Forouzan, M. Salimi, M.S. Gadala "ALE Axi-symmetrical forging approach to ring rolling FE simulation" International Conference on Computational Methods." December 2004, Singapore.

 

· M. Saniei, M. Salimi "Development of a cold rolling model in mixed Regime" TICME2005, Tehran

 

· F. Farhat_Nia and M. Salimi, "Clad sheet rolling analysis by the modified slab method" ESAFORM 2005 Conference Romania.

 

· S.M. Sombolestan and M. Salimi "Optimization of common breaking down sequences in shape rolling "The 13th Annual (international) Conference of Mechanical Engineering, ISME2005. Isfahan, Iran.

 

· F. Farhat-Nia & M. Salimi "Analysis of curvature development in clad sheet rolling by the modified slab method" The 13th Annual (International) Conference of Mechanical Engineering, ISME2005

 

· M. Saniei & M. Salimi "Development of a cold rolling model in mixed Regime." 13th Annual (International) conference on Mechanical Engineering (ISME2005), Isfahan, Iran.

 

· M. Soheili & M. Salimi "On the evaluation of the fillet weld sizes of T Joints structures" The 13th Annual (international) Conference of Mechanical Engineering, ISME2005, Isfahan, Iran.

 

· M.R. Forouzan, M. Salimi, M. Kadkhodaei and J. Izadi, ”Rolling Technology rank in steel making industry in Iran” The 12th Annual (International) Mech. Eng. Conf.,(ISME2004), Tehran, May 2004

 

· M. Salimi, M. Kadkhodaei, M.R. Forouzan, E. Rabie-Zadeh and J.Izadi, ”Rolling technology rank in steel making industry in Iran” The 12th Annual (International) Mech. Eng. Conf., ISME2004,

· Tehran, May 2004.

 

· M. Salimi, M. Esfahanian, and M. Ranjbar ”Development of a flow stress model in hot rolling control of steel” plate and strip. The 12th Annual (International) Mech. Eng. Conf.,ISME2004, Tehran, May

· 2004.

 

· F. Farhat_Nia, M. Salimi, “Application of modified slab method in asymmetrical rolling of strip.” The 12th Annual (International) Mech. Eng. Conf.,ISME2004), Tehran, May 2004

 

· M. Salimi, S. Asghari, “ Study on cold rolling of plate in hydrodynamic lubrication” The 11th Annual ( International) Mech. Eng. Conf.,(ISME2004), Mashhad, May 2003.

 

· M. Salimi, M. Kadkhodaei, “ Analysis of Cold Asymmetrical Rolling by    the Slab Method” The 11th Annual ( International) Mech. Eng. Conf.,(ISME2004), Mashhad, May 2003.

 

· M. Salimi & F. Farhat-Nia “Study on Asymmetrical Characteristics and Determinationof Developed Curvature” International Conference on Advanced Manufacturing Technology, Kuala Lumpur, Malysia, ICAMT 2004, pp856-861.

 

· M. Salimi &S. Asghari “Investigations On Cold Rolling of Strip in Attendance of Hydrodynamic Lubrication” International Conference on Advanced Manufacturing Technology, Kuala Lumpur, Malysia, ICAMT 2004, pp.868-872.

 

· F. Farhat-Nia, M. Salimi& M.R. Movahhedy “Investigation of Asymmetrical Plate Rolling by Arbitrary Lagrangian Eulerian Finite Element Technique” Matador (34th) Manufacturing Automation  systems Technology Application Design Optimization  Research, UMIST, UK, 2004.

 

· M.R. Forouzan, M. Salimi, M.S. Gadala, “Guide Roll Simulation in FE Analysis of Ring Rolling.” The 12th Int. Mech. Eng. Conf. (ISME2004), Tehran, March 2001.

 

· M.R.Forouzan, M. Salimi and M.S. Gadala” Effect of Guide rolls on ring rolling process Parameters” Advanced Technology of Plasticity, Proceeding of 7th ICTP Oct., 28-31 2002 Yokohama,

· Japan, Vol. 1, pp 541-546.

 

· M. Salimi and M. R. Forouzan “Application of Surface Influence coefficient in Roll Bending of Crown and Flatness Control” Advanced Technology of Plasticity Proceeding of 7th ICTP Oct. 28-31 2002 Yokohama, Japan, Vol. 1, pp 541-546

 

· M. Salimi and M.R. Forouzan, "Determination of Set points for the Finishing Mills of Hot Plate Rolling" Int. Mech. Eng. Conf.(ISME2001) Rasht, March 2001.

 

· M. Salimi and A. Kiassat," Study on Deformation Efficiency of  Asymmetrical Strip Rolling," 6th Int. Mech. Eng. Conf., Zahedan,  March 1999.

 

· M. Salimi and M.R. Forghani," Metal Flow Analysis of Asymmetrical Rolling of Cold Wide Strip,"6th Int. Mech. Eng. Conf., Zahedan, Mar.1999.

 

· M. Salimi, "Theoretical and Experimental Aspects of Rolling Thick and Thin Walled Profiled Rings," M.F.C.M.W., Tehran, 1990.

 

· M. Salimi and H. Ahmadi," Modifications into the Coiling Mechanism  of Product in Hot Rolling Process," Mech. Eng. Conf., Iran, 1994.

 

· M. Salimi," Mechanics of Deformation in Wire Drawing and Extrusion With the Superposition of an Oscillatory Stress", Int. Mech. Eng. Conf., 1994

 

· M. Salimi and M.H. Khaksari," Simulation of Hot Rolling Process, "I.C.C.M.E, Shiraz, 1992.

 

· M. Salimi and J.B. Hawkyard," Development of Transverse Curvature in Forming Thin Walled Profiled Rings," I.C.C.M.E., Shiraz, 1992.

 

 

 

 

 

 

در باره موسسه                                                معرفی ویدئویی موسسه                  افتخارات

 

امکانات آزمایشگاهی و کارگاهی                             گالری عکس

IMAGE
همایش ملی کاربردهای شیمی در فناوریهای نوین
همایش ملی و بین المللی کاربردهای شیمی در فناوری های... ادامه مطلب...
IMAGE
همایش ملی فناوری نانو از تئوری تا کاربرد
    همایش ملی فناوری نانو از تئوری تا کاربرد هر سال در... ادامه مطلب...
IMAGE
همایش ملی جریان سیال، انتقال حرارت و جرم
    همایش ملی جریان سیال، انتقال حرارت و جرم هر ساله به... ادامه مطلب...