Employment History:

Awards & Honours:

Outstanding Professor of the year 2009 in Iran.Accredited by the Iranian Society of Mechanical Engineers.  

· Distinguished Researcher of the year 2008at Isfahan University of Technology.

· Distinguished Researcher of the year 2007at Isfahan University of Technology.

· Distinguished Researcher of the year 2004in Isfahan province.

· Distinguished Researcher of the year 2003in Isfahan Province.

· Exceptional Researcher of the year 2004 atIsfahan University of Technology.

· Distinguished Researcher of the year 2003In Isfahan University of Technology.

· The Bootaan a Award appreciated by theIranian Society of Mechanical Engineers ( Non Governmental Organization) by virtue of supervision ofthe most excellent PhD thesis of the year 2002.

· The Ali-Nasab Award by the Iranian Societyof Mechanical Engineers ( Non Governmental Organization) by virtue of supervision ofthe most excellent M.Sc. thesis of the year 2002

Member in Editorial Board:

Editorial Board, Sharif Journal of Scienceand Engineering, Transaction on Mechanical Engineering.

· Editorial Board, Ferdousi JournalApplied Science and Computation.

· Editorial board, Journal of solidMechanics in Engineering.

Organizing Committee of CONGRESSES :

Chairmanof the 13^th International conference onMechanical Engineering, Iranian Society of Mechanical Engineers ISME2006,Isfahan, Iran.

· Chairman of the 14^thInternational conference on Mechanical Engineering, Iranian Society ofMechanical Engineers ISME2006, Isfahan, Iran.

COURSES LECTURED

Undergraduate Courses:

1-Static

2-Dynamics

3-Engineering Mathematics

4-Strengthof Materials I and II

5-EngineeringPlasticity

6-ManufacturingTechnology                          

7-EngineeringInstrumentation and Control

8-DieDesign for Sheet Metal Fabrication

Graduate Courses:

1-AppliedPlasticity (for Manufacturing Program)

2-Advancedand Computational Theory of Plasticity

3-MetalForming

4-Theoryof Plate and Shells

5-Theoryof Elasticity

6-SheetMetal Fabrication

7-Pressurevessel piping and design

Others:

Short-termcourses in" Manufacturing and Metal Working Technology"mostly   for industry

Industrial Research Works

Isfahan University of Technology:

· Design and manufacture of an experimentalring rolling mill.

· Investigations into the collapse of simpleand reinforced thin walled channel beams under bending  load.

· A better estimation of rolling load andtorque in rolling process.

Iran National Steel Companies:

· Investigations into the method of reducingvarious defects on cold rolled uncoated sheet.

· Width control in hot strip rolling.

· Improving production efficiency anddimensional control in rolling of sections/beams.

· Modifications into the coiling mechanismof product in skin-pass rolling.

· Presenting of a general research plan forsteel companies in Iran (based on the trend of technology in  steelproduction industries)

· Study on lubrication effects in coldrolling of steel strip

· Investigations on tension leveling systemsand Optimization of current rigs in cold rolling mills in  Mobarekeh steelComplex.

· On the cutting technique of HSS steel bywire-cut machines.

· Investigations on skin pass rolling forelimination /Marked reduction of vibration effects on this unit product atMobarekeh steel complex.

· Technical Investigations of the TensionReel in the Pickling Line  at Mobarakeh Steel Complex for  DomesticManufacturing of the  Assembly.

· Determination of Physical and OperationalSpecifications of a Tin Plate Pilot for Mobarakeh Steel  Complex

· Recognition of shape defects includingwave and thickness profile and rocedures for prohibiting of such defects andpresenting methods for marked reduction of such defects in clod rolled productsof  Mobarakeh Steel Company.  

International Systems Engineering andAutomation Company:

· Development of mathematical models forpredicting crown and flatness in a four high plate mill  (Mobarakeh steelComplex)

Publications

International Journal Papers

· S. Asghari, M. Salimi, “Finite element simulation of thermalbarrier coating performance under thermal cycling” Surface and Coatings Technology, Article in Press, avaialble online, 2010.

· M.R. Vaziri, M. Salimi, M. Mashayekhi “Evaluation ofchip formation simulation models for material separation in the presence ofdamage models” SimulationModelling Practice and Theory, accepted for publication, 2010.

· S. Asghari,M. Salimi, M. Salehi “Modeling nonlinear elastic behavior ofplasma sprayed ceramics and its evolution with sintering” Materials Science and Engineering A, 527 (16-17), pp.4241-4249, 2010

· Valizadeh, M., Lomov, S., Ravandi, S.A.H., Salimi, M., Rad, S.Z.”Finiteelement simulation of a yarn pullout test for plain woven fabrics” Textile ResearchJournal, 80 (10), pp. 892-903, 2010.

· A.H. Sakhaei, M. Salimi, M. Kadkhodaei “Caliber Designin Shape Rolling by Finite Element Method” steel research int. 81 No. 9, 2010.

· A. Nourani, M. Salimi, A. Sadeghi Dolatabadi “Workroll wear modeling in hot plate rolling by neural network” InternationalJournal of Engineering, Science and Technology, 2010, Vol. 2, No. 6, pp. 85-97,2010.

· M. Valizadeh, S.A.H. Ravandi, M. Salimi, “Experimentalevaluation of oscillation model for yarn pullout test of plain-woven fabricsbased on force-balance method” Journal of the Textile Institute, 101 (4), pp. 343-349, 2010.

· M. Salimi, M. M. Sahebifard “Optimization of StripProfile and Flatness Using Hybrid Neural-GA Algorithm” steel research int. 81,No. 9, 2010.

· M.R. Vaziri, M. Salimi, M. Mashayekhi “A newcalibration method for ductile fracture models as chip separation criteria inmachining” Simulation Modeling Practice and Theory 18, pp. 1286-1296, 2010.

· M. R. Niroomand, M. R. Forouzan, M. Fasihfar, M.Salimi “Chattering Control Based Algorithm for Nonlinear Optimization of5-Stands Cold Strip Rolling Process Parameters” steel research int. 81, No. 9,2010.

· M. Qwamizadeh, M. Kadkhodaei, M. Salimi “Analysis ofCurvature Development in Asymmetrical Plate Rolling in Free and ForcedHorizontal Entry Conditions” steel research int. 81, No. 9, 2010.

· M. Vaziri, M. Salimi” Comparison of finite elementmethod based on nodal displacement

· and absolute 3 nodal coordinate formulation (ANCF) inthin shell analysis”  Communications in Numerical methods in Engineering,Published Online: 12 Nov 2009 Copyright © 2010 John Wiley& Sons, Ltd

· M. Jamshidian, A. Beheshti, M. Olfatnia, A. Sadeghiand M. Salimi “Analysis of Strip Residual Curvature in Anti-Crossbow CassetteDuring Tension Leveling”. Steel Research International, Vol. 79,  2008.

· Ziaei-Rad S., Salimi M., Mirfendereski L., “Finiteelement  modeling of foam-filled tapered thin-walled tubes under obliqueimpact loading” Steel Research International, Vol. 79,  2008.

· R. Mehrabi, M. Salimi, S. Ziaei-Rad, A. Kamranian, M.Silani, “Influences of operational parameters on chatter vibration of coldrolling machines using finite element method” Steel Research International,Vol. 79,  2008.

· M.R. Forouzan, I. Kiyani, M. Salimi, A.R. Ghasemi“Analysis of chatter vibration in cold strip rolling, part I: System equivalentdamping” Steel Research International, Vol. 79,  2008.

· M. Olfatnia, M. Salimi, S. Ziaei-rad, A.Kamranian" Investigation into sources of chatter and vibrations in coldrolling mills" Steel Research International, Vol. 79,  2008.

· M. Salimi, M. Esfahanian, M. Arabof , “ A mixed filmlubrication model in rolling of foils” Steel Research International, Vol. 79,2008.

· L.Mirfendereski, M. Salimi, S. Ziaei-Rad “Parametric Study and Numerical Analysisof Empty and Foam-filled Thin Walled Tubes under Static and Dynamic Loadings”Int. J. Mech. Sci. 50, 1042-1057, 2008.

· M.Valizadeh, S.A.H. Ravandi, M. Salimi and M. Sheikhzadeh “Determination ofInternal Mechanical Characteristics of Woven Fabrics using the Force- BalanceAnalysis of Yarn Pullout Test” TJTI, Vol. 99 No.1 pp. 47-55, 2008.

· M. Kadkhodaei, M. Salimi, RKND. Rajapakse and M.Mahzoon “ Microplane modeling of shape memory alloy” Physica Scriptia T129,pp.  329-334, 2007.

· M. Kadkhodaei, M.Salimi, RKND. Rajapakse and M. Mahzoon, “Modeling of Shape Memory Alloys Basedon Microplane Theory” J. Intell. Mater. Syst. Struct. 19 (5), pp. 541-550, 2008

· M. Kadkhodaei, M.Salimi, M. Poursina “ Analysis of Asymmetrical Sheet Rolling by GeneticAlgorithm” Int. J. Mechanical Sciences 49, pp. 622-634, 2007.

· F.Farhat-Nia, M. Salimi and M.R. Movahhedy “Elasto-plastic finite elementsimulation of  asymmetrical plate rolling using an ALE approach” Journalof Material Processing Technology, 2006.

· M. Sombolestan, M. Salimi "Power Optimization ofCommon Breaking-Down Sequences in Shape Rolling" Journal of MaterialProcessing  Technology, 177 (1-3), pp. 517-520, 2006.

· M.Saniei, M. Salimi “Development of a mixed film lubrication model in coldrolling” Journal of Material Processing Technology, 177 (1-3), pp. 575-581,2006.

· M.Salimi, M. Kadkhodaei “Slab analysis of asymmetrical sheet rolling” Journal ofMaterials Processing Technology,150 (3) pp.215-222, 2004.

· M.Salimi, M. Kabirian “An upper bond stream function elemental technique for theforging of spur gears” Steel Grips, Journal of steel and related Materials, 2,pp.159-163, 2004.

· M.Salimi , M. Kadkhodaei “Asymmetrical cold sheet rolling in free horizontalentry conditions” Steel Grips Journal of steel and related Materials, 2,pp.75-80, 2004.

· M.R.Forouzan, M. Salimi , M.S. Gadala, A.A. Aljawi “Guide rolls simulation inFE   analysis   of ring rolling” Journal of Materialprocessing Technology, 142, pp. 213-223, 2003.    

· M.R.Forouzan, M. Salimi ,M.S. Gadala, “Three _ dimensional FE analysis pf ringrolling by employing thermal spokes method” International Journal of MechanicalSciences 45, pp. 1975-

· 1998,2003.

· M.Salimi and F. Sassani “Modified slab Method for Predicting Parameters andCurvature in Asymmetrical Rolling of Strip International Journal of MechanicalSciences, Vol. 44, pp.1999-   

· 2023,2002

· M.Salimi, ”Strain Distribution in Plane Strain Deformation through Wedge-shapedDies” Journal of Material processing Technology 125-126 pp. 317-322, 2002.

· M.Salimi and M.R. Forouzan,” Determination of Bending Actuators Set-points toControl Crown and Flatness in Hot Rolling of Strip” Journal of Materialprocessing Technology 125-126,  pp. 670-677, 2002.

· M.Salimi and J.B. Hawkyard," Forming of Thin Walled Profiled Rings by RingRolling," Int. J. Mech. Sci., Vol.30, No.7, pp. 527 – 532, 1988.

Persian(Farsi) Journal Papers

· R.Mehrabi, S Ziaei-rad , M. Salimi” Simulation of Chatter in Cold Rolling Stripusing Finite Element Method” Journal of Amir Kabir, 2010

· M.Salimi, M. Jamshidian, A. Beheshti “Bending Unbending Analysis of Anisotropicsheet under plane Strain Condition” Journal of Esteghlal, Vol. 28, 2008.

· F.Farhat-Nia, M. Salimi "Application of Modified slab method in asymmetrical plate rolling" Accepted for publication in the Journal ofEsteghlal, 2006

· A.Fazileh, M. Salimi “ The effect of friction in rolling of section by the FEmethod” Seasonal Scientific specialist in Solid Mechanics, No 1,  2009

· M.Araboff, M. Salimi, M. Esfahanian “On the lubrication effect in rolling of foils”Seasonal Scientific specialist in Solid Mechanics, No 3, 2009

· F.Farhat-Nia,  M. Salimi "Rolling Analysis of Clad sheet by themodified slab method." Journal of Esteghlal, Vol.25, 2005

· M.Salimi, S. Asghari "Investigations on cold rolling of strip in attendanceof Hydrodynamic lubrication." Journal of Esteghlal, Vol.24, No.1 2ndVolume, 2005.

· M.R.Forouzan, M. Salimi and M.S. Gadala” Ring Rolling FE analysis in the presenceof the guide rolls”, Journal of Esteghlal, Vol.21, No.2, 2003.

· M.Salimi , S. Mohammadi," Metal Flow Analysis in Hot Rolling of Plate andStrip Using Matrix Operator Method for Constructing Plastic Slip Line Field,"Journal of Amir Kabir, Vol.10

· M.Salimi, S.R. Yassini, "Frictional Effect on Spread and Bulge in FlatRolling," Journal of Amir Kabir, Vol.9, No.36, 1998.

· M.Salimi,  H.R. Malek," Investigations into the Effect of InterstandTensions on Width Control in a Hot Rolling Process," Journal of Esteghlal,Vol.15, No.2, pp.95 - 105, 1997.

· M.Salimi, H. khademizadeh," Experimental Investigations into the Collapse ofSimple and Reinforced Thin-Walled Channel Beams Under Bending Loads,"Journal of Esteghlal, Vol.17, No.1, pp.153-164,1998

Conference Papers

· A.H. Sakhaei, M. Salimi, M. Kadkhodaei,“Investigations into the roll pass Design of Channel Section Beams inConventional Rolling”  18^th Annual (international) Conference of MechanicalEngineering ISME2010, Tehran, Iran

· M. M. Sahebifard, M. Salimi, A. Sadeghi, H. Alaei,“Control of thickness profile and shape defects in cold rolling by neuralnetwork and genetic algorithm” 18^th Annual (international) Conference of MechanicalEngineering ISME2010, Tehran, Iran

· A. Nourani M. Salimi, A. Sadeghi Dolatabadi “ A workroll wear profile model in hot rolling of strip”

· 18^th Annual (international) Conference of MechanicalEngineering ISME2010, Tehran, Iran

· E. Mohammadi, M. R. Forouzan,M. R. Niroomand, M. Salimi “Optimization of multi stand cold strip rollingprocess parameters according to chatter phenomenon by TAANGA method” EuropeanCongress on Computational Mechanics, ECCM 2010, Paris, France.

· I. Mohagheghian, M. Kadkhodaei, M. Salimi “A FullyCoupled Electro-Thermo-Mechanical Model for SMA Wires” AES – ATEMA’ 2009Montreal, Canada: July 06 -10, 2009

· S. Jafari, M. Kadkhodaei, M. Salimi “MicroplaneModeling of Shape Memory Alloy Torque Tubes” AES – ATEMA’ 2009 Montreal,Canada: July 06 -10, 2009

· M. Salimi, S. Ziaei-Rad, and A. M. Ebrahimpour“Quasicontinuum (QC) simulation of aluminum film  nanoindentation”National Conference on New Materials, 10-13 June 2008, Iran

· H. Alaei, M. Salimi, A. saboonchi, S. Kheradamand, M.Sahebifard  “Development of a neural network for thermal crown evaluationin hot rolling” ISME2008, Kerman, Iran.

· I. Mohagheghian, M. Salimi  M. Kadkhodaei,“Thermal response of SMA wires under electrical actuation” ISME2008, Kerman,Iran.

· M. Salimi, S. Ziaei-Rad, and A. M. Ebrahimpour“Evaluation of mechanical properties in nano-indentation by a cylindericalindentors using a Quasicontinuum method” ISME2008, Kerman, Iran

· I.Kiani, M. Olfat Nia, M. Salimi, S. Ziaei-Rad and A. Kamranian “Determination ofcold rolling parameters for prohibiting of chatter in tandem mills” ISME2008,Kerman, Iran.

· M. Tarkesh  M. Salimi. and RT. Tarkesh “GearRolling on deep drown vessels wall”. ISME2008, Kerman, Iran

· M. Olfat-Nia, A. Kamranian, A. Sadeghi, M. Jamshidian,S. Ziaei-Rad  and M. Salimi “Further Investigation on Chatter Analysis inCold Rolling Mills for Finding the Optimum Range of Design Parameters” Conf. onApplications and design in Meechanical Engineering, 25-27 Oct. 2007, Kangar,Perlis Malaysia

· M. Arabof,M. Salimi and M. Esfahanian “Investigations on rolling of foils considering thelubricant effects”. ISME2008, Kerman, Iran

· M. Salimi& M. Kabirian “An upper bond streamfunction elemental technique for the forging of spur gears”,  ISME2007,Tehran, Iran

· M.Olfatnia, M. Salimi, and S. ZiaeeRad “Further investigations on chatteranalysis in cold rolling mills for finding optimum range of design parameters”Conference on applications and design in Mechanical Engineering, Malaysia, 2007

· M. Salimi, “Improving Surface quality and mechanicalproperties of cold rolled product for Structural Auto Body.” The keynote speechof the 1st Conferance of Metal Forming of the Iranian Society of MechanicalEngineers, 2006, Tehran, Iran.

· M.Valizadeh, S. Hoseini, M. Salimi and M. ShyeKhzadeh “Investigations on yarnpull-out test using an image processing method” 3^rd international Textile, Clothing andDesign Conf. Croatia, 2006

· MKadkhodaei, M Calimi, RKND Rajapakse and M Mahzoon ^" Microplane modeling of shape memoryalloys" 2nd International Symposium on Func4ional Materials (ISFM-2007) 2007, Hangzhou, China

· M.Valizadeh, S.A. Hossaini, M. Salimi and M. Shakhzadeh “On the  HangingFiber Method in studying the effect of normal load on friction coefficient ofthe Yarn” 14^th Annual(international) Conference of Mechanical Engineering ISME2006, May 16-18, 2006

· M.R.Forouzan, I. Salehi, M. Salimi, M. Esfahanian, "Elasto-Viscoplastic FEAnalysis of  Slab Width Reduction by Sizing Press Mill" The 14thannual (international) conference on Mechanical Engineering ISME2006, Isfahan,Iran

· M.Valizadeh, S.A. Hossaini, M. Salimi and M. Shakhzadeh "The EmpiricalInvestigations of an Analytical Model Predicting Yarn - Pullout Force of WovenFabrics" The 8th Asian Textile Conference, Tehran, 2005

· I.Salehi, M.R. Forouzan, M. Esfahanian, M. Salimi, M. H. Adibi “Elasto-Viscoplastic FE Analysis of Slab Width Reduction by Sizing Press Mill”Asia Steel International Conference 2006, Japan.

· F. Farhat-Nia, M. Salimi “AnAnalytical approach to clad sheet rolling by the modified slab method”GALVATECH”07 The Iron and Steel Institute of Japan, Osaka, Japan

· MSalimi, N. Ghazi” The Effect of interstand tension on the rolling parameters byNeural-network” The 14^th Annual (international) Conference of Mechanical Engineering ISME2006,May 16-18, 2006

· M.Salimi, L. Tahvilian “Investigations on the Effect of Rolling Parameters onStrip Mechanical Properties by Neural-network” The 14^th Annual (international) Conference ofMechanical Engineering,  ISME2006, May 16-18, 2006

· R.Saleh, M. Salimi “On the calculation of the roll Separating force in ColdRolling- An industrial Approach” The 13^th Annual (international) Conference of Mechanical Engineering, ISME2006,17-19

· May2005

· M.Salimi, Mostafa Jamshidian, Ali Beheshti ”Bending Unbending Analysis ofAnisotropic sheet under plane Strain Condition” The 14^th Annual (international) Conference ofMechanical Engineering ISME

· 2006May 16-18, 2006

· M.Saniei and M. Salimi “The effect of Backward and Forward Tension on Coldrolling Parameters” Steel Rolling 2006 Cedex, France.

· M.Jelokhanian & M. Salimi "On the thread rolling of the screws "The13^th Annual(international) Conference of Mechanical Engineering, ISME2005, Isfahan, Iran.

· M.Salimi & M. Soheili "On the evaluation of the fillet weld sizes of TJoints structures." The 14^th Annual (international) Conference of Mechanical Engineering, ISME2006

· M.Salimi, M. Esfahanian, N. Rasekh Saleh J. Izadi, B. Bahadorani & S. Abbasi"On the Calculation of the Roll Separation force in cold rolling."The 13^th Annual(international) Conference of Mechanical

· Engineering,ISME2005, Isfahan, Iran.

· S.M.Sombolestan and M. Salimi “Power Optimization of Common Breaking DownSequences” ICTP 2005 Oct.9-13 Verona, Italy

· M. R.Forouzan, M. Salimi, M.S. Gadala "ALE Axi-symmetrical forging approach toring rolling FE simulation" International Conference on ComputationalMethods." December 2004, Singapore.

· M.Saniei, M. Salimi "Development of a cold rolling model in mixedRegime" TICME2005, Tehran

· F.Farhat_Nia and M. Salimi, "Clad sheet rolling analysis by the modifiedslab method" ESAFORM 2005 Conference Romania.

· S.M. Sombolestanand M. Salimi "Optimization of common breaking down sequences in shaperolling "The 13^th Annual(international) Conference of Mechanical Engineering, ISME2005. Isfahan, Iran.

· F.Farhat-Nia & M. Salimi "Analysis of curvature development in cladsheet rolling by the modified slab method" The 13^th Annual (International) Conference ofMechanical Engineering, ISME2005

· M.Saniei & M. Salimi "Development of a cold rolling model in mixedRegime." 13^th Annual(International) conference on Mechanical Engineering (ISME2005), Isfahan, Iran.

· M.Soheili & M. Salimi "On the evaluation of the fillet weld sizes of TJoints structures" The 13^th Annual (international) Conference of Mechanical Engineering, ISME2005,Isfahan, Iran.

· M.R.Forouzan, M. Salimi, M. Kadkhodaei and J. Izadi, ”Rolling Technology rank insteel making industry in Iran” The 12^th Annual (International) Mech. Eng. Conf.,(ISME2004), Tehran, May 2004

· M. Salimi, M. Kadkhodaei, M.R. Forouzan, E.Rabie-Zadeh and J.Izadi, ”Rolling technology rank in steel making industry inIran” The 12^thAnnual (International) Mech. Eng. Conf., ISME2004,

· Tehran, May 2004.

· M. Salimi, M. Esfahanian, and M. Ranjbar ”Developmentof a flow stress model in hot rolling control of steel” plate and strip. The 12^thAnnual (International) Mech. Eng. Conf.,ISME2004, Tehran, May

· 2004.

· F. Farhat_Nia, M. Salimi, “Application of modifiedslab method in asymmetrical rolling of strip.” The 12^thAnnual (International) Mech. Eng. Conf.,ISME2004), Tehran, May 2004

· M. Salimi, S. Asghari, “ Study on cold rolling ofplate in hydrodynamic lubrication” The 11^th Annual ( International) Mech. Eng. Conf.,(ISME2004),Mashhad, May 2003.

· M. Salimi, M. Kadkhodaei, “ Analysis of ColdAsymmetrical Rolling by    the Slab Method” The 11^thAnnual ( International) Mech. Eng. Conf.,(ISME2004), Mashhad, May 2003.

· M. Salimi & F. Farhat-Nia “Study on AsymmetricalCharacteristics and Determinationof Developed Curvature” InternationalConference on Advanced Manufacturing Technology, Kuala Lumpur, Malysia, ICAMT2004, pp856-861.

· M. Salimi &S. Asghari “Investigations On ColdRolling of Strip in Attendance of Hydrodynamic Lubrication” InternationalConference on Advanced Manufacturing Technology, Kuala Lumpur, Malysia, ICAMT2004, pp.868-872.

· F. Farhat-Nia, M. Salimi& M.R. Movahhedy“Investigation of Asymmetrical Plate Rolling by Arbitrary Lagrangian EulerianFinite Element Technique” Matador (34^th) Manufacturing Automation  systems TechnologyApplication Design Optimization  Research, UMIST, UK, 2004.

· M.R.Forouzan, M. Salimi, M.S. Gadala, “Guide Roll Simulation in FE Analysis of RingRolling.” The 12th Int. Mech. Eng. Conf. (ISME2004), Tehran, March 2001.

· M.R.Forouzan,M. Salimi and M.S. Gadala” Effect of Guide rolls on ring rolling processParameters” Advanced Technology of Plasticity, Proceeding of 7^th ICTP Oct., 28-31 2002 Yokohama,

· Japan,Vol. 1, pp 541-546.

· M.Salimi and M. R. Forouzan “Application of Surface Influence coefficient in RollBending of Crown and Flatness Control” Advanced Technology of PlasticityProceeding of 7^th ICTPOct. 28-31 2002 Yokohama, Japan, Vol. 1, pp 541-546

· M.Salimi and M.R. Forouzan, "Determination of Set points for the FinishingMills of Hot Plate Rolling" Int. Mech. Eng. Conf.(ISME2001) Rasht, March2001.

· M.Salimi and A. Kiassat," Study on Deformation Efficiency of Asymmetrical Strip Rolling," 6th Int. Mech. Eng. Conf., Zahedan, March 1999.

· M.Salimi and M.R. Forghani," Metal Flow Analysis of Asymmetrical Rolling ofCold Wide Strip,"6th Int. Mech. Eng. Conf., Zahedan, Mar.1999.

· M.Salimi, "Theoretical and Experimental Aspects of Rolling Thick and ThinWalled Profiled Rings," M.F.C.M.W., Tehran, 1990.

· M.Salimi and H. Ahmadi," Modifications into the Coiling Mechanism  ofProduct in Hot Rolling Process," Mech. Eng. Conf., Iran, 1994.

· M.Salimi," Mechanics of Deformation in Wire Drawing and Extrusion With theSuperposition of an Oscillatory Stress", Int. Mech. Eng. Conf., 1994

· M.Salimi and M.H. Khaksari," Simulation of Hot Rolling Process,"I.C.C.M.E, Shiraz, 1992.

· M.Salimi and J.B. Hawkyard," Development of Transverse Curvature in FormingThin Walled Profiled Rings," I.C.C.M.E., Shiraz, 1992.